Tail pitch slider

Normal pitch slider is use only 1 ball bearing, it is not so correct.So i made 2 bearings type pitch slider.
Ball bearings are 5mm*8mm*2.5mm type. Outer holder is made from aluminium, center bush is blass.
Pitch slider move smooth, good for tail stability.

And tail pitch linkage rod is made 1.2mm music wire.(HIROBO's) Outer pipe is HIROBO's 2.0mm stainress pipe. This way is good for controll responce. And use ball links at linkage rod's end.

<BACK>

1997/11/19

1997 p-bear@ba2.so-net.or.jp